Planet PL-WNAP-W2200UE

300Mbps 802.11n In-Wall Wireless Access Point w/ USB Charger (EU Type, 802.3af/at)

EAN
4711605283434
Bu Ürünün Yer Aldığı Kategori(ler)

Standard Compliant Hardware Interface

  • Compliant with IEEE 802.11n wireless technology with data rate of up to 300Mbps
  • One 10/100BASE-TX port and one PoE powered device (PD) port
  • USB charger port for charging most of mobile devices easily
  • European 86-type wall outlet compatibility

Secure Network Connection

  • Advanced security: 64-/128-bit WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK (TKIP/AES encryption), 802.1x
  • Supports wireless MAC address filtering control to limit the connected wireless clients
  • Supports 802.1Q VLAN and SSID-to-VLAN mapping
  • Supports IP/Port/MAC address/URL filtering, DoS, SPI Firewall
  • Supports DMZ and port forwarding
  • Bandwidth control per IP address to increase network stability


Multiple Operation Modes and Wireless Features

  • Multiple operation modes: AP, Gateway, Repeater, WDS
  • WMM (Wi-Fi multimedia) provides higher priority to multimedia transmitting over wireless
  • Coverage threshold to limit the weak signal of clients occupying session
  • Real-time Wi-Fi channel analysis chart and client limit control for better performance

Easy Deployment and Management

  • Supports PLANET AP Controllers in AP mode
  • Easy discovery by PLANET Smart Discovery
  • Self-healing mechanism through system auto reboot setting
  • System status monitoring through remote Syslog Server
  • Supports PLANET DDNS/Easy DDNS

 

Hardware Specifications
Interfaces LAN 1 x 10/100BASE-TX RJ45 port
Auto-negotiation and auto MDI/MDI-X
Interfaces PoE Port 1 x 10/100Mbps auto MDI/MDI-X RJ45 port (rear panel)
※ IEEE 802.3af/at PD port
Interfaces USB Port USB 2.0, Type A, 5V DC, 0.5A output
Antennas Gain 2 x 2dBi antenna
Button Reset button (Press over 15 seconds to reset the device to the factory default)
LED Indicators Wireless
Dimensions (Φ x H) 86 x 35 x 86 mm
Weight 106 ±5g
Power Requirements 48V 0.5A, IEEE 802.3af/at PoE+
Power Consumption < 5W
Mounting In-wall mount
Wireless Interface Specifications
Standard IEEE 802.11b/g/n 2.4GHz
Media Access Control CSMA/CA
Data Modulation Transmission/emission type: DSSS/OFDM
Data modulation type: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Frequency Range FCC: 2.412~2.462GHz
ETSI: 2.412~2.472GHz
Operating Channels FCC: 1~11
ETSI: 1~13
RF Power < 20dBm (EIRP)
Receive Sensitivity 2.4GHz:
 802.11b(1Mbps):-88dBm
 802.11b(11Mbps):-85dBm
 802.11g(6Mbps):-88dBm
 802.11g(54Mbps):-68dBm
 802.11n(MCS0/MCS8):-68dBm
 802.11n(MCS7/MCS15):-68dBm
Software Features
LAN Static IP
Supports IP-MAC binding
Wireless Mode ■ Access Point
■ Gateway
■ Repeater
■ WDS (AP/Bridge/Station)
Channel Width 20MHz, 40MHz,
Encryption Security 64-/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Wireless Security Enable/Disable SSID Broadcast
Wireless MAC address filtering
User Isolation
Wireless Advanced WMM (Wi-Fi Multimedia): 802.11e Wireless QoS
Multiple SSIDs: up to 4
Wireless Isolation: Enables to isolate each connected wireless client from communicating with each other
Provides wireless statistics
Max. SSIDs 4
Max. Clients 64 (20 is suggested, depending on usage)
Max. WDS Peers 4
Wireless QoS Supports Wi-Fi Multimedia (WMM)
Wireless Advanced Auto channel selection
5-level transmit power control (100%, 75%, 50%, 25%, 12.5%)
Client limit control, coverage threshold
Wi-Fi channel analysis chart
Status Monitoring Device status, wireless client list
PLANET Smart Discovery
DHCP client table
System Log supports remote syslog server
VLAN IEEE 802.1Q VLAN (VID: 3~4094)
SSID-to-VLAN mapping to up to 4 SSIDs
Self-healing Supports auto reboot settings per day/hour
Management Remote management through PLANET DDNS/ Easy DDNS
Configuration backup and restore
Supports UPnP
Supports IGMP Proxy
Supports PPTP/L2TP/IPSec VPN Pass-through
SNMP v1/v2c/v3 support, MIB I/II, Private MIB
Central Management [1] Applicable controllers: WAPC-500, WAPC-1000 and Smart AP Control(SAPC)

*Remarks[1]: the feature will be supported through firmware/system upgrade.
Environment & Certification
Temperature Operating: -20 ~ 55 degrees C
Storage: -40 ~ 70 degrees C
Humidity Operating: 10 ~ 90% (non-condensing)
Storage: 5 ~ 95% (non-condensing)
Regulatory CE, RoHS

 

×